Hydraulic Institute Hydraulic Institute Data Tool Publications Training Certification Contact Us About Us
Unit Conversions Kinematic & Dynamic Viscosity Conversion Pipe Friction Loss Calculator Line Shaft Bearing Loss Calculator Horizontal Tank Volume Calculator Vertical Tank Volume Calculator Spherical Tank Volume Calculator Atmospheric Pressure Calculator
×

${mark_index+1} of ${marks.length} matches in current topic

Navigate current topics
  • No matches found
  • ${search_results.length} topic matches
  • ${res.section}
    ${res.title}
  • Definitions & Resources
    • A) Welcome & Introduction
    • B) Acronyms & Definitions
    • C) Pump Types
    • D) References
    • E) Additional Resources
  • Pump Fundamentals
    • A) System Curves
    • B) Pump Curves
    • C) Combined Pump & System Curves
    • D) Pump Principles
    • E) Submergence
  • Fluid Properties
    • A) Water
    • B) Solids and Slurries
    • C) Viscosity
    • D) Other Fluids
  • Fluid Flow
    • A) Pipe Frictional Losses
    • B) Losses in Valves, Fittings, and Bends
    • C) Losses With Other Fluids
    • D) Losses in Nozzles
    • E) Losses With Paper Stock
  • Pipe, Flange & Motor dimensions
    • A) Steel Pipe
    • B) Stainless Steel Pipe
    • C) Ductile Iron Pipe
    • D) Non-Ferrous Pipe and Tube
    • E) Plastic PVC Pipe
    • F) Flange Dimensions
    • G) Motor Dimensions
  • Calculators
    • A) Unit Conversions
    • B) Kinematic & Dynamic Viscosity Conversion
    • C) Pipe Friction Loss Calculator
    • D) Line Shaft Bearing Loss Calculator
    • E) Horizontal Tank Volume Calculator
    • F) Vertical Tank Volume Calculator
    • G) Spherical Tank Volume Calculator
    • H) Atmospheric Pressure Calculator
  • About the HI DATA TOOL
    • Releases
    • Members and Contributors
×

${mark_index+1} of ${marks.length} matches in current topic

Navigate current topics
  • No matches found
  • ${search_results.length} topic matches
  • ${res.section}
    ${res.title}

  • A) Welcome & Introduction
  • B) Acronyms & Definitions
  • C) Pump Types
  • D) References
  • E) Additional Resources

  • A) System Curves
  • B) Pump Curves
  • C) Combined Pump & System Curves
  • D) Pump Principles
  • E) Submergence

  • A) Water
  • B) Solids and Slurries
  • C) Viscosity
  • D) Other Fluids

  • A) Pipe Frictional Losses
  • B) Losses in Valves, Fittings, and Bends
  • C) Losses With Other Fluids
  • D) Losses in Nozzles
  • E) Losses With Paper Stock

  • A) Steel Pipe
  • B) Stainless Steel Pipe
  • C) Ductile Iron Pipe
  • D) Non-Ferrous Pipe and Tube
  • E) Plastic PVC Pipe
  • F) Flange Dimensions
  • G) Motor Dimensions

  • A) Unit Conversions
  • B) Kinematic & Dynamic Viscosity Conversion
  • C) Pipe Friction Loss Calculator
  • D) Line Shaft Bearing Loss Calculator
  • E) Horizontal Tank Volume Calculator
  • F) Vertical Tank Volume Calculator
  • G) Spherical Tank Volume Calculator
  • H) Atmospheric Pressure Calculator

  • Releases
  • Members and Contributors

Pump Types

Index

Pump Types - Rotodynamic Overhung
Pump Types - Rotodynamic Between Bearing
Pump Types - Rotodynamic Vertically Suspended
Pump Types - Rotary Positive Displacement
Pump Types - Reciprocating Positive Displacement

Pump Types - Rotodynamic Overhung
Pump Types - Rotodynamic Overhung
Acronym Pump Description Reference
OH0 Overhung impeller - flexibly coupled - horizontal - frame mounted - single stage ANSI/HI 14.1-14.2
OH0c Overhung impeller - flexibly coupled - horizontal - axial flow - single stage ANSI/HI 14.1-14.2
OH0d Overhung - flexibly coupled - horizontal - frame mounted - pitot tube pump ANSI/HI 14.1-14.2
OH1 Overhung impeller - flexibly coupled - horizontal - foot mounted - single stage ANSI/HI 14.1-14.2
OH1h Overhung impeller - flexibly coupled - horizontal - foot mounted - self-priming - single stage ANSI/HI 14.1-14.2
OH1i Overhung impeller - flexibly coupled - horizontal - foot mounted - sealless - single stage ANSI/HI 5.1-5.6
OH1j Overhung impeller - flexibly coupled - horizontal - foot mounted -multi-stage ANSI/HI 14.1-14.2
OH2 Overhung impeller - flexibly coupled - horizontal - centerline mounted - single stage ANSI/HI 14.1-14.2
OH3 Overhung impeller - flexibly coupled - vertical - in-line - integral bearing frame - single stage ANSI/HI 14.1-14.2
OH3g Overhung impeller - flexibly coupled - vertical - end suction - single stage ANSI/HI 14.1-14.2
OH4 Overhung impeller - rigidly coupled - vertical - in-line - single stage ANSI/HI 14.1-14.2
OH5 Overhung impeller -close-coupled - vertical - in-line - single stage ANSI/HI 14.1-14.2
OH5g Overhung impeller -close-coupled - vertical - end suction - single stage ANSI/HI 14.1-14.2
OH5i Overhung impeller -close-coupled - vertical - in-line - sealless - single stage ANSI/HI 5.1-5.6
OH6 Overhung impeller - close-coupled - vertical - in-line - high-speed integral gear - single stage ANSI/HI 14.1-14.2
OH7 Overhung impeller - close-coupled - horizontal - single stage ANSI/HI 14.1-14.2
OH7j Overhung impeller - close-coupled - horizontal - multi-stage ANSI/HI 14.1-14.2
OH7i Overhung impeller - close-coupled - horizontal - sealless - single stage ANSI/HI 5.1-5.6
OH8 Overhung impeller - close-coupled - submersible - diffuser - end suction - single stage ANSI/HI 14.1-14.2
OH8b Overhung impeller - close-coupled - submersible - volute - end suction - single stage ANSI/HI 14.1-14.2
OH13j Overhung impeller - rigidly coupled - horizontal - foot mounted - multi-stage ANSI/HI 14.1-14.2
OH13i Overhung impeller - rigidly coupled - horizontal - foot mounted - sealless - single stage ANSI/HI 5.1-5.6
CP1 Circulator pump - close-coupled - sealless - horizontal - in-line ANSI/HI 14.1-14.2
CP2 Circulator pump - close-coupled - horizontal - in-line ANSI/HI 14.1-14.2
CP3 Circulator pump - flexibly coupled - horizontal - in-line ANSI/HI 14.1-14.2
RT1 Regenerative turbine - overhung - side channel ANSI/HI 14.1-14.2
RT2 Regenerative turbine - overhung - peripheral ANSI/HI 14.1-14.2

Pump Types - Rotodynamic Between Bearing
Pump Types - Rotodynamic Between Bearing
Acronym Pump Description Reference
BB1 Between bearing impeller - 1 or 2 stage - axially split ANSI/HI 14.1-14.2
BB2 Between bearing impeller - 1 or 2 stage - radially split ANSI/HI 14.1-14.2
BB3 Between bearing impeller - multi-stage - axially split ANSI/HI 14.1-14.2
BB4 Between bearing impeller - multi-stage - radially split - single casing ANSI/HI 14.1-14.2
BB5 Between bearing impeller - multi-stage - radially split -double casing ANSI/HI 14.1-14.2
RT3 Regenerative turbine - between bearings - side channel ANSI/HI 14.1-14.2
RT4 Regenerative turbine - between bearings - peripheral ANSI/HI 14.1-14.2

Pump Types - Rotodynamic Vertically Suspended
Pump Types - Rotodynamic Vertically Suspended
Acronym Pump Description Reference
VS0 Vertically suspended - single casing - discharge through column - submersible ANSI/HI 14.1-14.2
VS1 Vertically suspended - single casing - discharge through column - diffuser ANSI/HI 14.1-14.2
VS2 Vertically suspended - single casing - discharge through column - volute ANSI/HI 14.1-14.2
VS3 Vertically suspended - single casing - discharge through column - axial flow ANSI/HI 14.1-14.2
VS4 Vertically suspended - single casing - separate discharge - line shaft ANSI/HI 14.1-14.2
VS5 Vertically suspended - single casing - separate discharge - cantilever ANSI/HI 14.1-14.2
VS6 Vertically suspended - double casing - diffuser ANSI/HI 14.1-14.2
VS7 Vertically suspended - double casing - volute ANSI/HI 14.1-14.2
VS7j Vertically suspended - double casing - volute - multi-stage ANSI/HI 14.1-14.2
VS8 Vertically suspended - in-line casing - diffuser ANSI/HI 14.1-14.2

Pump Types - Rotary Positive Displacement
Acronym Pump Description Reference
Circumferential piston ANSI/HI 3.1-3.5
Gear type - sealless ANSI/HI 4.1-4.6
Gear, external ANSI/HI 3.1-3.5
Gear, internal with crescent ANSI/HI 3.1-3.5
Gear, internal without crescent ANSI/HI 3.1-3.5
Lobe, single ANSI/HI 3.1-3.5
Lobe, three ANSI/HI 3.1-3.5
Piston, axial ANSI/HI 3.1-3.5
Screw type - Sealless ANSI/HI 4.1-4.6
Screw, single (progressing cavity) ANSI/HI 3.1-3.5
Screw, three (untimed) ANSI/HI 3.1-3.5
Screw, two (timed) ANSI/HI 3.1-3.5
Tube, flexible (peristaltic) ANSI/HI 3.1-3.5
Vane type - sealless ANSI/HI 4.1-4.6
Vane, flexible ANSI/HI 3.1-3.5
Vane, sliding ANSI/HI 3.1-3.5

Pump Types - Reciprocating Positive Displacement
Acronym Pump Description Reference
AOD Air-operated - Bellows - simplex or duplex ANSI/HI 10.1-10.6
AOD Air-operated - Diaphragm - simplex or duplex ANSI/HI 10.1-10.5
Air-operated - piston
Air-operated - plunger
CVMP Controlled volume metering - diaphragm ANSI/HI 7.1-7.5
CVMP Controlled volume metering - piston ANSI/HI 7.1-7.5
Piston - direct acting - single or double acting - simplex or duplex HI 8.1-8.5
Plunger - direct acting - single or double acting - simplex or duplex HI 8.1-8.5
Piston - single or double acting - simplex or multiplex HI 6.1-6.5
Plunger- single or double acting - simplex or multiplex HI 6.1-6.5

Last updated on April 19th, 2024

Related topics

A) Welcome & Introduction
B) Acronyms & Definitions
D) References
E) Additional Resources